If your phone not rooted using the ROOT button.
1. Make scatter by the use of MTKDroidTools
Scatter is the text file with addresses of the blocks, essential for the SP FlashTool application.
After advent of scatter don't shut the primary window of the program! otherwise as soon as once more it is vital to activate phone.
2. In SP FlashTool select this scatter and go on the read back tab.
3. Choose path and a ROM file name
click on Add button. Double click on of a mouse on the regarded line. make a choice a file identify, the name has to start with ROM_ as bargains FlashTool! understand that route and the title of ROM_ file.
4. resolve the ROM_ size
type has to face in HEX. in the box of begin deal with it will be important to put in writing down 0x000000. within the container of length we replica from scatter the address of the block following after restoration or the address of different block for fuller backup. For phones with form of the blocks EXT4 it's the cache block address. The number in the Hex layout has initially 0x
5 . Choose Read Page Only on yaffs2 type blocks phones
In FlashTool select learn page only within the box of learn means. If this container isn't present, the window with this question can emerge, too we choose web page only. On phones with EXT4 blocks it does not get out (typically).
6. Read Back ROM
click on learn back button and connect the switched-off telephone to pc. here the options relying on a concrete phone are possible. perhaps it is vital to press on the similar time with connect of a cable the camera or volume buttons. test and find out about work with FlashTool in threads with identical telephones! On some MT6573 fashions, for instance on B63, it could possibly't be finished with any combos and simplest testpoint want!
7. Prepare files for FlashTool and make CWM
If the whole thing passed with out errorss, we open the MTK Droid Root & tools window which we left on 1th step. If for some purpose the window is not present, it is vital to activate telephone and to connect it to the program. click on To process file ROM_ from FlashTool button and make a selection the ROM_* file saved on the sixth step. At successful unpacking rom it'll be supplied to choose CWM from an identical phone. Chosen CWM it is checked on compliance to the connected telephone and if adequate, the CWM is created.
beginning with v2.4.0 CWM it is made automatically and the file from identical phone isn't looked for any further!
Аttention! Yaffs2 kind blocks from this backup can't be Downloaded to telephone, they aren't correct! Use backup on ninth step if cellphone have yaffs2 sort blocks!
8. Download new CWM to the phone
begin FlashTool, select scatter in the folder created on the 7th step. eliminate marks from all blocks! click on restoration and we select the file CWM in the identical folder which was created on the 7th step. click download and connect a cable to computer (telephone must be switched off) and are expecting the top of course of. bad! On this step the CWM recovery block has to be marked only! also it is necessary to use most effective the obtain button and not to use at all the Firmware upgrade button!
9. Make backup, set up SuperUser and so on
Load telephone in CWM mode, connect to MTK Droid Root & instruments, go on the tab root, backup, recovery and, urgent on this tab the essential buttons, we do:
- backup! ! ! (if in telephone there is yaffs2 sort blocks, do right here indubitably, they received with readBack on 7th step are not proper)
- set up superuser (steadily imply "get root" under it)
- and different if need
0 comments:
Post a Comment